Click image to view full size image
1.product Introduction
Although aquarium lights are important for the healthy growth of aquatic plants and fish, they may negatively affect their health if not used properly. If the lights are too strong or too long, the water temperature will rise and their growth cycle will be affected, or cause deterioration of water quality or even algae proliferation, which is detrimental to the growth of your fish. Our fish tank submersible light with timer makes up for this one defect, it automatically adjusts the brightness and switch according to the time we set, simulating the day and night cycle, ensuring that the plants and fish have enough time to rest, avoiding stress and growth problems caused by day and night reversal or over-lighting, and at the same time avoiding the waste of power due to the long time working of the lamps. Our LED aquarium lights can also promote the ecological balance of the aquarium, and help customers reduce the cost of aquaculture and thus improve the efficiency of aquaculture through energy saving and prolonging the life of the lamps and lanterns.
2.Product Parameter (specification)
|
Product Name |
ATL-30 6W submersible aquarium light with timer LED Aquarium Lamp |
|
Material |
Acrylic |
|
Watt |
6W |
|
Input Voltage |
100-240V |
|
Output Voltage |
12V/0.5A |
|
LED Type |
SMD5050 |
|
Color |
white and blue |
|
LEDs |
30pcs |
|
Size |
28cm/11.02" |
|
Packaging Size |
31*8*5cm/12.20"*3.15"*1.97" |
|
Carton Size |
48.5*33.5*43cm/19.09"*13.19"*16.93" |
|
Qty/ctn |
50pc |
|
Fit for Aquarium |
30-50cm/11.81"-17.72" |
3.Product feature and application
The white, the bule or the white & blue light brings out the color of everything in tank, creates a wonderful aquascape.
Ultra-bright 7000-7500k White LEDs and rich 460nm blue light are sufficient to grow your plant thriving.
The fish tank light has built-in timer and 3 timing durations, it will come on and go off at the same time every day and light
up for 6 hours,10 hours or 12 hours.
Waterproof and esay to install. It is submersible and with moveable suction cups, mount the light on tank bottom or at the top.
Customers can regulate the light on and off times based on the needs of the aquatic life, so saving them from daily manual light adjustment. The memory feature of the timer will automatically turn the lights on or off at the chosen point of time to guarantee the reliability of the light cycle.
The timer may change the light length depending on the season, plant or fish demand. Aquatic plants, for instance, can require more light hours in spring and summer, so we should create a longer lighting cycle; in autumn and winter the light hours can be dropped suitably. Our timer settings provide six hours, ten hours, and twelve hours to fit various consumer requirements. Automatic adjustment can thus be set in line with the memory capacity of this timer, so saving time to repeat the adjustment every day and so enhance the management effectiveness.
There are more brightness options from 10-100%. Each press can increase 10% brightness divided. When come to max, it will start again from 10% brightness.
It has 3 lighting modes on the switch: white light, blue light, blue&white light.Model
1: Only 9 white lights on.
Model 2:Only 9 blue on.
Model 3: 9 white and 9 blue lights all on.
4.Product qualification
Guangdong GAKO Pet Products Co., Ltd. is a professional aquarium equipment manufacture which sets product design,production and sales as one.Since 2010, our company began to produce LED aquarium dedicated lights, and now the products expands to small fish tank, air pump,heater, filter, germicidal lamp and so on. And most of our products has passed a variety of certification include CE,FCC etc.
Q: 1. Will your LED light bulbs work on a dimmer switch?
A: We do not recommend using our LED light bulbs on a dimmer switch, this type of switch can potentially cause damage to the bulb.
Q: 2. Do your LED bulbs emit UV light?
A: No. But you should never point an LED light into your eyes. The light is very bright and could cause damage.
Q: 3. What format of design file do you want for printing my Logo?
A: If you can provide your artwork as an Al, CDR format file, we would be the best choice.
However, if this is not possible, our in-house designers can produce the artwork.
http://www.gako-aquarium.com/